WX-9000 (WX-9000/AU-WX9000EPIO)

Q1 : Is a computer required to control the WX-9000 series ?

A1 : No, the WX-9000 can be used as a stand-alone device if required. All the functions of the unit can be addressed using the integral display and controls on the front panel of the WX-9000. An optional Remote control Unit (ER-WXRC) or the WX9K Navi Control Software (supplied with unit) can be utilized for external control.
supported by the WX-9000 series ?

Q2 : Which languages are supported by the WX-9000 series ?

A2 : English and Japanese.

Q3 : Can the WX-9000 parameters be saved ?

A3 : Yes, in two ways:
(1) Current parameters can be saved to the WX-9000 internal memory.
(2) Multiple parameters can be saved to an SSD.

Q4 : Is there a remote-control available for the WX-9000 ?

A4 : Yes. The model number is ER-WXRC(9000).

Q5 : Is it possible to stop the fan for about 10 minutes after recording starts ?

A5 : Yes, it is possible.

Q6 : Can the data recorded by a WX-9016 be played-back on a WX-9032, or vice versa ?

A6 : Yes.

Q7 : What is the analog signal input channel IEPE (PA) input ?

A7 : IEPE is an abbreviation for "Integrated Electronics Piezo-Electric" and refers to a voltage output type piezoelectric method.

WX9K-Navi (control software)

Q1 : Can the WX-9000 be used via a computer ?

A1 : Yes. The WX9K Navi is the navigation WX-9000 software for setting all operational parameters and is supplied with the unit.

Q2 : Is the WX9K Navi compatible with both 32bit OS and 64bit OS ?

A2 : 64bit OS.

Q3 : Which Windows OS can the WX9K Navi be used with ?

A3 : Windows10(64bit),11.