TEAC Data Recorder site

Selectable Configuration

The LX-1000 can be selected from configurations that suit your needs.

The LX-1000 is comprised of a main unit (LX-1000) and one or more expansion units (AU-LX1000EPIO). The number of input and output channels can be increased by adding more expansion units (AU-LX1000EPIO). Up to three expansion units (AU-LX1000EPIO) can be added to one main unit.

Main unit LX-1000 + Expansion unit AU-LX1000EPIO

Selection 1 : Selection of a model with the number of recording channels

●16-channel model (main unit only)
LX-1000 16-channel model (main unit only)

4ch x 4 slots = 16ch

●32-channel model (main unit + 1 expansion unit)
LX-1000 32-channel model (main unit + 1 expansion unit)

4ch x 8 slots = 32ch

●48-channel model (main unit + 2 expansion units)
LX-1000 48-channel model (main unit + 2 expansion units)

4ch x 12 slots = 48ch

●64-channel model (main unit + 3 expansion units)
LX-1000 64-channel model (main unit + 3 expansion units)

4ch x 16 slots = 64ch

*When multiple expansion units (AU-LX1000EPIO) are connected, channel numbering starts with channel 1 at the top left and ends with the last channel (32, 48 or 64) at the bottom right.
*Up to 256 channels can be recorded simultaneously by using the synchronization option.

Selection 2 : Selection with amplifier type and number of channels (4 channels for 1 slot)

E.g. 1) Selection of 32-channel model from Selection 1

LX-1000 Selection of 32-channel model from Selection 1

Selection of analog input amplifier module (PA) for all 8 slots
4ch x 8 slots = 32ch

E.g. 2) Selection of 32-channel model from Selection 1

LX-1000 Selection of 32-channel model from Selection 1

Selection of 4 slots x analog input amplifier module (PA)
4ch x 4 slots = 16ch

Selection of 4 slots x analog output amplifier module (AO)
4ch x 4 slots = 16ch 32ch in total

E.g. 3) Selection of 48-channel model from Selection 1

LX-1000 Selection of 48-channel model from Selection 1

Selection of 4 slots x analog input amplifier module (PA)
4ch x 4 slots = 16ch

Selection of 4 slots × strain input amplifier module (ST)
4ch x 4 slots = 16ch
Plus, cooling fan unit (option) for each unit.
*A cooling fan is necessary if even one strain input amplifier module (ST) is installed.

Selection of 4 slots x analog output amplifier module (AO)
4ch x 4 slots = 16ch

*Amplifier modules can be added to the LX-1000 in single-slot units.

*When installing different types of amplifier modules, install AR-LXPA1000 modules, followed by AR-LXST1000 modules, and then AR-LXAO1000 modules in order from the lowest slot number.

*Blank panels are attached to unused slots (Only when ordering).

Selection 3 : Selection of optional items

*1 A cooling fan is necessary if even one strain input amplifier AR-LXST1000 is installed.
*2 Be sure to use three Battery packs

Remote control unit ER-LXRC1000
Cooling fan unit *1 TZ-LXFAN1000
Battery unit BU-LX1000 (NP-L7S) *2
Battery pack NP-L7S
Battery charger JL-2PLUS Possible to charge 2 battery packs (NP-L7S) at one time
GPS receiver LXGPS18X(5Hz)
Carrying cases CS-LX1016 (for 16-channel model) Customizable
CS-LX1032 (for 32-channel model) Customizable
Front handle TZ-LXFH1000
Vehicle adapters TZ-LXVMK series
DC power cable CL-DRDC