TEAC Data Recorder site
TEAC Data Recorder site

Specifications

Comparison with LX-100 Series

Specifications LX-1000 LX-100
Number of input channels Basic configuration: 4ch (up to 16ch)
Extended maximum: 64ch		 Basic configuration: 8ch (up to 16ch)
Extended maximum: 32ch
Input amplifier / module IEPE(DC/AC) / Strain(DC) / CAN（module） DC / IEPE(DC/AC) / Strain(DC)
Input range IEPE：0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 / 50V IEPE：0.01 / 0.0316 / 0.1 / 0.316 / 1 / 3.16 / 10 / 50V
Pulse input (standard equipment) Number of input channels:2
Input connector type:BNC
Input format:unbalanced
Input impedance:100 kΩ
Input voltage:±50V maximum (threshold ±20 V)
Input frequency:450 kHz maximum
The input voltage and input frequency have limits.
Threshold:±0.5 V, ±1 V, ±2.5 V, ±5 V, ±10 V, ±20 V
(switchable)
Division ratio setting:1-255
Moving average:1, 2, 4, 8, 16

Measurement modes
(1) Count (gate) mode
Measurement range: 1–255× sampling frequency
Measurement precision: ±5 counts
(2) Count (total) mode
Measurement precision: ±5 counts
(3) Period mode
Measurement ranges: 1 msec, 5 msec, 10 msec, 50 msec, 100 msec, 500 msec, 1 sec
Measurement precision: ±0.2% (using 24-bit AD), ±0.3% (using 16-bit AD)
(4) Frequency mode
Measurement range: 10 Hz, 20 Hz, 50 Hz, 100 Hz, 200 Hz, 500 Hz, 1 kHz, 2 kHz, 5 kHz, 10 kHz, 20 kHz
Measurement precision: ±0.2% (using 24-bit AD), ±0.3% (using 16-bit AD)
(5) rpm mode
Measurement ranges: 1500 rpm, 3000 rpm, 6000 rpm, 9000 rpm, 12000 rpm, 15000 rpm, 18000 rpm, 24000 rpm
Number of pulses per revolution setting:1-255
Measurement precision: ±0.2% (using 24-bit AD), ±0.3% (using 16-bit AD)
The measurement precision of each mode does not include sampling frequency series 5. 		Number of input channels:2
Threshold Level：±0.5 / 1 / 2.5 / 10 / 20V
Division Ratio setting：1 - 255
Moving Average：1 - 16
Measurement modes：count（gate、total）/ period / frequency/ rpm
GPS input (standard equipment) GPS receiver (Option) None
CAN module 2 ports / module
Baud rate:125kbps, 200kbps, 250kbps, 500kbps, 800kbps, 1000kbps, 1250kbps, 1600kbps, 2000kbps, 2500kbps, 4000kbps, 5000kbps
Recording mode:All frames recording /ID filtering / Data signal values
Compatibleprotocol:ISO-11898-1 2.0A (11-bit ID)/ 2.0B (29-bit ID)
ISO 11898-1:2015 (CAN FD)
Bus modes of operation:Normal / Listen Only		 None
TEDS IEPE
Number of output channels 4ch/1module
BNC		 8ch / 1module
BNC
Output range ±1 - 5V (adjustable in 0.1V steps)
Synchronized operation Up to 4 units(MAX256ch) Up to 4 units(MAX128ch)
IEPE sensor power supply 24V
4mA		 28V
4mA
Max sampling frequencies 102.4kHz
Sampling frequencies 96k / 100k / 65.536k / 102.4k Hz
Low speed sampling1Hz		 96k / 100k / 65.536k / 102.4k Hz
Low speed sampling1/60Hz
Maximum recording rate 3.2MByte/s
40kHz bandwidth (102.4kHz sampling) x 16-bit x 16ch		 1.6MByte/s
40kHz bandwidth (102.4kHz sampling) x 16-bit x 8ch
A/D Converter 16 / 24bits
Dynamic range 120dB（FFT-based） 96dB
Recording media SDHC / SDXC / PC MEMORY/ CF / PC
Maximum recording capacity SDXC:128GByte MEMORY:575MByte
CF:32GByte
Data Acquisition File Format TAFFmat
(TEAC Data Acquisition File Format)
Voice memo input 8kHz/8bit/Mono
Voice memo output Yes
Speaker Yes
Digital Control Yes
VR-24 synchronization Yes
External Trigger Yes
Real Time Monitor Yes
Interface for PC LAN(1000BASE-T) LAN(100BASE-TX)
wireless function option　*Sales undecided None
Realtime FFT -
Cooling No external cooling required (Fanless: up to 32 ch) Yes
Power supply AC:100V – 240V (from included AC adaptor)
DC:8 - 36V		 AC:100V – 240V (from included AC adaptor)
DC:11 - 30V
Power consumption 16ch model (AR-LXPA1000 x 4) Approximately 30W
32ch model (AR-LXPA1000 x 8) Approximately 47W		 16ch model Approximately 42W
32ch model Approximately 56W
Battery Li-Ion
IDX NP-L7S
14.8V 4.6Ah		 Ni-MH
PACO HP-30L
13.2V 3.3Ah
Battery continuous use time 7 hours 3 hours
Operating temperature and humidity range 0 - 40℃ / 10-80% (no condensation) 0 - 45℃ / 10-85% (no condensation)
External dimensions 300W x 65H x 200D（mm）16ch
300W x 109H x 200D（mm）32ch
Expansion unit 300W x 44H x 200D（mm）		 300W x 65H x 200D（mm）16ch
300W x 110H x 200D（mm）32ch
Expansion unit 300W x 45H x 200D（mm）
Weight 3.1kg(16ch/PA)
5.4kg(32ch/PA)
2.3Kg（Expansion Unit）		 4.0kg(16ch/PA)
6.1kg(32ch/PA)

Main unit (LX-1000)
Recording media

SDXC/SDHC
SDHC/SDXC card slot 1
Compatible media SDHC/SDXC cards
SDHCSDXC
Recording capacity 8GB - 128GB
Speed class Class 10 recommended

Sampling frequencies and bandwidths

Sampling frequencies andbands Sampling Series① Corresponds to DAT/audio sampling frequencies
Series② Corresponds to integer frequencies
Series③ Frequency axis during 2N FFT analysis : integrated in resolution
Series④ Frequency axis during 2N FFT analysis : integrated in resolution
Series⑤ Down-sampling executed using software processing
(1kHz sampling frequency)
Series① Series② Series③ Series④ Series⑤
Fs
(kHz)		 Bandwidth
(kHz)		 Fs
(kHz)		 Bandwidth
(kHz)		 Fs
(kHz)		 Bandwidth
(kHz)		 Fs
(kHz)		 Bandwidth
(kHz)		 Fs
(Hz)		 Bandwidth
(Hz)
96.00 40.00 100.00 40.00 102.40 40.00 65.536 25.60 500 200
48.00 20.00 50.00 20.00 51.20 20.00 32.768 12.80 200 80
24.00 10.00 20.00 8.00 25.60 10.00 16.384 6.40 100 40
12.00 5.00 10.00 4.00 12.80 5.00 8.192 3.20 50 20
6.00 2.50 5.00 2.00 5.12 2.00 4.096 1.60 10 4
3.00 1.25 2.00 0.80 2.56 1.00 2.048 0.80 5 2
1.50 0.625 1.00 0.40 1.28 0.50 1.024 0.40 1 0.4

Number of channels that can be recorded simultaneously

* Number of input channels is a maximum of 2 channels.
* The number of analog recording channels is per amplifier module (4ch).
Fs (kHz) Number of analog recordable channels
Series① Series② Series③ Series④ 16bit 24bit
Number of input channels No pulse input Number of input channels No pulse input
96.00 100.00 102.40 65.536 12ch 16ch 4ch 8ch
48.00 50.00 51.20 32.768 28ch 32ch 12ch 16ch
24.00 20.00 25.60 16.384 60ch 64ch 28ch 32ch
12.00 10.00 12.80 8.192 64ch 64ch 60ch 64ch
6.00 5.00 5.12 4.096 64ch 64ch 64ch 64ch
3.00 2.00 2.56 2.048 64ch 64ch 64ch 64ch
1.50 1.00 1.28 1.024 64ch 64ch 64ch 64ch

The following warnings apply to Series ⑤.

  • Monitor output and analog output amplifier output differ during recording and playback as follows.
    During recording: Data is output before down-sampling.
    During playback: Data is output after down-sampling.
  • During playback, the sampling frequency is always 1 kHz. For example, data recorded at 100 Hz will be played back at 10 times speed.
  • Aliasing could occur with sampling frequencies of 5 Hz or less.
Fs (Hz) Number of channels
Series⑤ 16bit 24bit
500 64ch 64ch
200 64ch 64ch
100 64ch 64ch
50 64ch 64ch
10 64ch 64ch
5 64ch 64ch
1 64ch 64ch

Recording times (when not using CAN recording)

The following tables show approximate recording times for different media capacities according to the combination of sampling frequency, recording bit depth and recording media.

【Approximate total 16-bit recording times for a 32GB SDHC (in days, hours:minutes:seconds)】
Fs
(kHz)		 Bandwidth
(kHz)		 4ch 8ch 16ch 32ch 64ch
96.00 40.00 11:26:10 5:44:51 2:52:53 - -
48.00 20.00 22:38:19 11:26:10 5:44:51 2:52:53 -
24.00 10.00 44:22:18 22:38:19 11:26:10 5:44:51 2:52:53
12.00 5.00 85:19:48 44:22:18 22:38:19 11:26:10 5:44:51
6.00 2.50 158:28:12 85:19:48 44:22:18 22:38:19 11:26:10
3.00 1.25 277:19:22 158:28:12 85:19:48 44:22:18 22:38:19
1.50 0.63 443:42:59 277:19:22 158:28:12 85:19:48 44:22:18
【Approximate total 24-bit recording times for a 32GB SDHC (in days, hours:minutes:seconds】
  • The recording times given in the above tables are approximations. Actual recording times might differ depending on the recording media used.
  • The above times are total possible recording times for the media. They are not continuous recording times.
  • The number of recording channels is the total number of analog input channels and pulse input channels.
  • You can use the following formula as a guide to calculate approximate recording times for other recording media.
    Approximate recording time (seconds) = effective recording capacity/(sampling frequency in Hz × number of channels × analog-digital conversion bit depth in bytes + 8000)
    Effective recording capacity: recording capacity – reserved space (in bytes)
    Recording capacity: nominal media capacity in bytes (example: 32GB = 32×1000×1000×1000)
    Reserved space: approximately 50 MB for headers and other files besides user data
    Analog-digital conversion bit depth: number of bytes for the quantization bit depth (4 for 24-bit or 2 for 16-bit) 8000: voice memo transmission speed at 8 kHz fixed sampling frequency with 8-bit quantization (8000 bytes/sec)
Fs
(kHz)		 Bandwidth
(kHz)		 4ch 8ch 16ch 32ch 64ch
96.00 40.00 5:44:51 2:52:53 - - -
48.00 20.00 11:26:10 5:44:51 2:52:53 - -
24.00 10.00 22:38:19 11:26:10 5:44:51 2:52:53 -
12.00 5.00 44:22:18 22:38:19 11:26:10 5:44:51 2:52:53
6.00 2.50 85:19:48 44:22:18 22:38:19 11:26:10 5:44:51
3.00 1.25 158:28:12 85:19:48 44:22:18 22:38:19 11:26:10
1.50 0.63 277:19:22 158:28:12 85:19:48 44:22:18 22:38:19

Voice memo input and output

  • Speaker output is disabled when an earphone is connected.

Voice memo output volume adjustment function
The output level can be adjusted using the LXK Navi application or an optional remote control unit.
Voice memo or monitoring signal selection function
The signal source for voice memo output can be set to either the voice memo or the monitoring output.
Sampling frequency 8 kHz
Quantization bit depth 8-bit
File format WAV file
Number of voice memo input channels 1 (mono)
Mic input jack connector 3.5mm TS mini jack
Earphone jack connector 3.5mm TS mini jack

Internal clock

Clock precision ±2 PRM (at 25℃)
Battery life 5 or more years

External interfaces

LAN 1000BASE-T connector × 1
RJ-45
DIGITAL CONTROL External control signal connection connector × 1
Angled, half-pitch, 36-pin Hirose DX10A-36S For optional remote control unit (ER-LXRC1000)
TRIG IN External trigger signal input connector × 1
BNC connector
SYNC IN Recording synchronization connector × 1
Angled, half-pitch, 28-pin
Hirose DX10A-28S
SYNC OUT Recording synchronization connector × 1
Angled, half-pitch, 28-pin
Hirose DX10A-28S
FG Frame grounding terminal(s)
GPS GPS connector × 1
Angled, half-pitch, 20-pin
Hirose DX10A-20S
PULSE IN Pulse input connectors × 2
BNC connector

General

*This weight is when 4 AR-LXPA1000 analog input amplifiers are installed. Not including AC adapters, media and optional boards.
External dimensions (W × H × D, not including protrusions)/weight*
LX-1000 300 × 65 × 200 mm /3.1 kg
AU-LX1000EPIO 300 × 44 × 200 mm/2.3 kg
Expansion unit connection screws M3 × 5 (countersunk)
Rubber feet attachment screws M3 binding × 8
DC power supply input
Rated input voltage DC 9–34 V
Guaranteed operating input voltage range DC 8–36 V
Power consumption
16-channel model approx. 30 W (AR-LXPA1000 × 4)
32-channel model approx. 47 W (AR-LXPA1000 × 8)
48-channel model approx. 64 W (AR-LXPA1000 × 12)
64-channel model approx. 81 W (AR-LXPA1000 × 16)
Included AC adapter
Rated input voltage AC 100–240 V
Input voltage range AC 90–264 V
Input power supply frequency 50/60 ±3 Hz
Rated output voltage 16 V
Rated output current 6.5 A
External dimensions (W × H × D) 68 × 35 × 153 mm
Weight 650g or less
Operating conditions
Operating temperature/humidity range 0 to 40°C/10 to 80% (no condensation)
Storage temperature/humidity range −20 to 60°C/5 to 90% (no condensation)
Operating air pressure range 860–1060 hPa
Vibration resistance MIL-STD-810E Figure 514.4-1, 2, 3
  • Confirm the operating conditions of each type of recording media.
Note
Cooling fan life 30,000 hours (fan alone at 20°C)

Included accessories

LXK Navi application for settings and waveform display 1
Microphone 1 (for voice memos)
Earphone 1
CD-ROM 1
Contents: Instructions for Use (this document), LXK Navi software, LXK Navi Instructions for Use
Connection reference sheet 1 (printed edition)
AC adapter LX-1000 only : 1
System with LX-1000 and one AU-LX1000EPIO unit : 1
System with LX-1000 and two AU-LX1000EPIO units : 2
System with LX-1000 and three AU-LX1000EPIO units : 2
AC adapter power cords same as number of AC adapters
Front handle(TZ-LXFH1000) 1

Pulse input

  • The measurement precision of each mode does not include sampling frequency series 5.

ATTENTION

  • In period mode, frequency mode and rpm mode, the least significant 1 bit is used for pulse timing. When a pulse is detected, the timing value is 1. At all other times it is 0.
  • Pulse timing is disabled when using sampling fre- quency series 5.
  • The recorded pulse input signal cannot be played back.
  • Aliasing could occur.
  • Analog signal and pulse data sampling are not synchronized.
  • In count (total) mode, period mode, frequency mode and rpm mode, if pulse input ceases while recording, the last pulse data will be retained.
Number of input channels 2
Input connector type BNC
Input format unbalanced
Input impedance 100 kΩ
Input voltage ±50V maximum (threshold ±20 V)
Input frequency 450 kHz maximum
  • The input voltage and input frequency have limits.
Threshold ±0.5 V, ±1 V, ±2.5 V, ±5 V, ±10 V, ±20 V
(switchable)
Division ratio setting 1-255
Moving average 1, 2, 4, 8, 16
Measurement modes
(1) Count (gate) mode Measurement range: 1–255× sampling frequency
Measurement precision: ±5 counts
(2) Count (total) mode Measurement precision: ±5 counts
(3) Period mode Measurement ranges: 1 msec, 5 msec, 10 msec, 50 msec, 100 msec, 500 msec, 1 sec
Measurement precision: ±0.2% (using 24-bit AD), ±0.3% (using 16-bit AD)
(4) Frequency mode Measurement range: 10 Hz, 20 Hz, 50 Hz, 100 Hz, 200 Hz, 500 Hz, 1 kHz, 2 kHz, 5 kHz, 10 kHz, 20 kHz
Measurement precision: ±0.2% (using 24-bit AD), ±0.3% (using 16-bit AD)
(5) rpm mode Measurement ranges: 1500 rpm, 3000 rpm, 6000 rpm, 9000 rpm, 12000 rpm, 15000 rpm, 18000 rpm, 24000 rpm
Number of pulses per revolution setting:1-255
Measurement precision: ±0.2% (using 24-bit AD), ±0.3% (using 16-bit AD)

Input/output amplifier modules

AR-LXPA1000 analog input amplifier

AR-LXPA1000 analog input amplifier
Input signal type DC, AC, IEPE
Number of input channels 4
Input connector BNC(Z=50Ωtype)
Input format unbalanced
Input impedance 1MΩ
Input range ±0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 / 50V
HPF OFF / 5Hz（-18dB/oct Butterworth filter）
Weighting FLAT/A/C（IEC TYPE1 compliant）
Absolute maximum input voltage ±50V(0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10V input ranges）
±100V(50V input range)
Input level LEDs Lights green when input level exceeds 10% of its input range, Lights red when it exceeds 115%
Input signal quantization bit depth 16/24-bit
Extended range ±127%(of rated range)
Analog-digital conversion method ΔΣconversion method(with simultaneous sampling and anti-aliasing filter)
Input frequency flatness characteristics (In AC mode, 1 Hz or higher) 10 V or less input range:±0.5dB
50V input range, 20kHz bandwidth or lower:±1dB
50V input range, 40kHz bandwidth:±2dB
Input range precision ±2%
Phase difference between input channels (identical input range) 10V or lower input range, 20kHz bandwidth or lower:1ºor less
10V or lower input range, 40kHz bandwidth:3ºor less
50V input range:3ºor less
Dynamic range 125dB or more(24-bit, 5V input range, 51.2kHz sampling frequency, input short, 3200-line FFT noise peak level)
Crosstalk −98dB or lower(1kHz, 24-bit, 1V input range)
Distortion 0.1% or less (1kHz)
IEPE sensor power supply DC24V/4mA
IEPE sensor disconnection detection Detection function included for each channel(Yellow LED blinks when disconnected)
TEDS Supports TEDS Ver. 1.0.

AR-LXST1000 strain input amplifier

AR-LXST1000 strain input amplifier

*1 Since LEDs could light for channels that do not have inputs connected depending on the setting range, set the maximum range to 100000 μst.
*2 After warming up for at least 30 minutes.
*3 When automatic balancing is conducted.
Input signal type Strain/DC
Number of input channels 4
Input format unbalanced, DC coupled
Input impedance 1MΩ
Absolute maximum input voltage ±25V
Input level LEDs Lights green when input level exceeds 10% of its input range, Lights red when it exceeds 115%
Linearity ±0.1%
Extended range ±127% (of rated range)
Input signal quantization bit depth 16/24-bit
Analog-digital conversion method ΔΣ conversion method (with simultaneous sampling and anti-aliasing filter)
LPF −48dB/oct Butterworth response, switched capacitor type, 4-channel independent, 10Hz/30Hz/100Hz/300Hz/1kHz/3kHz/10kHz/30kHz/, Pass cutoff frequencies
Input connector Lemo 7-pin 10-DIA. (EGG0B Type)
Pin assignments Pin assignments
Strain mode
Input range *1 ±500 / 1000 / 2000 / 5000 / 10000 / 20000 / 50000 / 100000 μst
Input range precision *2, *3 ±1%
Input frequency flatness characteristics Input range 20000 μst or higher:±0.5dB
Input range 10000 μst or lower: 20kHz bandwidth or lower:+0.5 to -1 dB,40kHz bandwidth] +0.5 to -2 dB
Gauge ratio 2.0
Bridge voltage 2/10 V (DC bridge format)
Bridge connection Full bridge
Applicable gauge resistance 2V bridge voltage:120–1000 Ω
10V bridge voltage: 350–1000 Ω
Remote sense Included
Balance adjustment method Electronic automatic balancing
Balance adjustment range ±10000μst (when 2V bridge voltage)
DC mode
Input range ±1 / 2 / 5 / 10V
Input range precision *1 ±1%
Input frequency flatness characteristics ±0.5dB
Dynamic range 110 dB or more
(24-bit, 5V input range, 51.2kHz sampling frequency, LPF off, input short, 3200-line FFT noise peak level)
Crosstalk -90 dB or lower (1 kHz, 24-bit, 1V input range)

AR-LXAO1000 analog output amplifier

AR-LXAO1000 analog output amplifier
Number of output channels 4
Output connector BNC(Z=50Ω type)
Output format Unbalanced
Output impedance 50Ω
Output range ±1 to 5V (Selectable in 0.1V increments)
Maximum output current 10mA
Output level LEDs Lights green when output level exceeds 10% of its output range Lights red when it exceeds 115%
Output signal quantization bit depth 16/24bit
Extended range ±127%(of rated range)
Digital-analog conversion method ΔΣconversion method
Output frequency flatness characteristics 20kHz bandwidth: ±0.15 dB
40kHz bandwidth: ±0.30dB
Phase difference between output channels 1 degree or less
Output range precision ±1%(5V output range)
S/N ratio 100 dB or more (within band, 5V output range)
Crosstalk -95dB or lower(within band, 1kHz signal, 5V output range)
Distortion 0.01% or less(within band, 1kHz signal, 5V output range)

AR-LXCAN1000 CAN module

AR-LXCAN1000 CAN module
Number of input ports 2
Input connector D-sub 9-pin
Supported protocols CAN 2.0A (11-bit identifiers)
CAN 2.0B (29-bit identifiers, extended format)
ISO 11898-1:2015 (CAN FD)
Baud rate4 125kbps, 200kbps, 250kbps, 500kbps, 800kbps, 1000kbps, 1250kbps, 1600kbps, 2000kbps, 2500kbps, 4000kbps, 5000kbps
ID filtering number 32/port
Bus mode Normal/Listen only
Thinning out 10ms, 20ms, 50ms, 100ms, 200ms, 500ms, 1s, 2s, 5s
Terminator Switchable
Maximum recording rate Set separately by port
Insulation Between ports
Pin assignments Pin Function
1 Reserved
2 CAN Low
3 CAN ground
4 Reserved
5 CAN cable shield
6 Reserved
7 CAN High
8 Reserved
9 Reserved
LED BUS
Lit green: Receiving CAN data
STS
Lit yellow: Over 80% of maximum recording rate
Lit red: Exceeding maximum recording rate

Accessories & Option products

Remote Control Unit ER-LXRC1000
Cooling Fan Unit TZ-LXFAN1000
Battery Unit BU-LX1000
Battery pack NP-L7S
Battery charger JL-2PLUS
GPS reciever Contact us
Carrying Case CS-LX1016/1032
Front Handle TZ-LXFH1000
Vehicle Mount Adapter TZ-LXVMK
DC Cable CL-DRDC
Battery Unit BU-LX1000

Battery Unit BU-LX1000

 

Battery Unit BU-LX1000

Mounting image with Battery pack NP-L7S
* Batteries are NOT included
* Be sure to use three Battery packs

 

Battery Unit BU-LX1000

Mounting image with 16CH model

Remote Control Unit ER-LXRC1000

Remote Control Unit ER-LXRC1000

Cooling Fan Unit TZ-LXFAN1000

Cooling Fan Unit TZ-LXFAN1000

Battery pack NP-L7S

Battery pack NP-L7S

Battery charger JL-2PLUS

Battery charger JL-2PLUS

Battery mounting image
* Battery is not included

Front Handle TZ-LXFH1000

Front Handle TZ-LXFH1000

DC power cable

DC Cable CL-DRDC

Carrying Case
CS-LX1016/1032

Carrying Case CS-LX1016/1032

Built-to-order
Completely made to order. Cables, sensors and notebook PCs can be also stored.
Please let us know the products to be stored.

Vehicle Mount Adapter
TZ-LXVMK
TZ-LXVMK32 (32ch model)

Vehicle Mount Adapter TZ-LXVMK TZ-LXVMK32 (32ch model)

System Composition

32ch model

System Composition LX-1000 32ch model

16ch model (e.g. AR-LXPA1000 × 4)
LX-1000 16ch model (AR-LXPA1000 × 4):
32ch model (e.g. AR-LXPA1000 × 8)
LX-1000 32ch model (AR-LXPA1000 × 8)
48ch model (e.g. AR-LXPA1000 × 12)
LX-1000 48ch model (AR-LXPA1000 × 12)
64ch model (e.g. AR-LXPA1000 × 16)
LX-1000 64ch model (AR-LXPA1000 × 16)